Getting Started with Fly Yourself

• Sep 21, 2025
• Knowledge

Article Details

Content

Help Content

Getting Started

1. Download the Apps: Get the Mobile Capture App and Desktop Uploader from the Self Capture for Properties Landing Page.

2. Prepare Your Controller:

   • Set it to 'P' mode for smoother flying.
   • Make sure joysticks are attached for manual control when needed.

3. Double Login:

   • Open the Zeitview App on your flight device and sign in.
   • Log into your Zeitview account on a separate device (computer/tablet) for uploading and viewing data.

Setting Up Your Flight

1. Create a New Site:

   1. In the Zeitview App, tap "Create New Site" (bottom right corner).
   2. Enter the property address. Tip: Enable location services for autofill.
   3. Hit "Next."

2. Choose Inspection Type:

   1. Automated Roof Inspection (Recommended): For detailed roof reports.
   2. Manual Inspection: For full manual control, no report generation.

3. Outline the Property:

   1. Place dots at the property corners.
   2. Adjust the outline as needed by dragging the dots.
   3. Hit "Reset" if you need to start over.

4. Select Your Reports

   1. Roof Inspection: Included with Automated Roof Inspections.
   2. Measurement Report / Condition Report: Optional (additional fees).

5. Tap "Confirm."

Configure Close-Up Images

• Adjust Speed: Faster speed means fewer images.
• Don't Change: Overlap, Gimbal Angle, Starting Waypoint.
• Flight Direction: Make lines perpendicular to the roof ridge.

Configure Ortho Images (Optional)

• On-Site Reporting: Set "Starting Waypoint" to max to skip ortho. You'll be asked to capture manual shots instead.
• Standard Ortho: Adjust Mapping Speed if needed.

Initiate Your Flight

1. Hit the 'Fly' Button: Stay aware of FAA Part 107 visual line of sight rules.
2. Align with the Ridge: Line up the drone with the roof line and hit "Confirm."
3. Monitor and Maneuver: Supervise the drone and live view. Use manual control to navigate obstacles, then hit "Resume."
4. Watch for Battery: Pause the flight and swap batteries if needed. Resume when you're ready.

Completing the Capture

1. Manual Shots (Optional): Have a clear checklist of areas to focus on.
2. Hit 'Complete': Land the drone safely.
3. Complete Image Scan: Keep your flight device powered on until this step is complete.
4. Begin Upload: Insert your SD card into a laptop to use the Desktop uploader.

Additional Tips

• Bad Cell Service? Upload later or go to App Settings > Insights Cloud Upload > Enable "Upload using WiFi or Data Plan."
• Review Assets: Log into your Zeitview Insights account on your computer/tablet to analyze the results.

You're all set!

Properties

Title

Getting Started with Fly Yourself

Article Created Date

9/21/2025 7:37 PM

URL Name

Insights-General-Zeitview-Pilot-App-Getting-Started-with-Fly-Yourself

Created By

Jason Norat, 9/21/2025 7:37 PM

Last Published Date

9/21/2025 7:37 PM

Number of Views298