PC - Coverage Checker (Beta)

PC - Coverage Checker (Beta)

Article Details

Content

Help Content

This tool will allow you to verify GPS metadata for all of your images quickly on a Satellite Map view while on-site to ensure you have 100% coverage for your capture. This tool works on a PC browser (Use Chrome as our recommended browser) and an iOS device only.

Notes

* This is NOT an upload of your mission. You will still need to upload all assets as usual after checking coverage.

How to use

  1. On your computer, go to your Pilot Dashboard on Zeitview, make sure you are logged in to your Zeitview profile.

  2. Click Upload next to the mission you'd like to check your coverage on.

  3. On the next screen, you should see a tab for GPS Coverage Check. Click on Check Coverage.

  4. You should now be at the GPS Coverage Check tool page.

  5. Plug in the SD card from the drone to your laptop. Select all files captured for the mission, then you can either drag & drop the images into the box or click on the Add Images button at the top-right corner of the screen.

  6. Once you've added images into the tool, it will begin to process the metadata for the images. It should be very quick and can take a bit longer for a larger set of images but should easily process in under a minute.

  7. After processing, you should have a live view of where each file was taken.

  8. If you need to add more images to this scan, click the Add Images button on the top-right corner of the screen. Do not drag & drop if you'd like to add more to the same scan.

To start a new scan, click on Start A New Scan below the map to start over.

Properties